Network Management

Reply
New Contributor
Posts: 4
Registered: ‎07-21-2010

Juniper WLA-321 AP can manage on Airwave ?

Hi All,

   WLA-321 AP can manage on Airwave via snmp on airwave ? From searching  we found that  WLC 880 controller and Ring Master (Software management ) are supported snmp but not sure WLA-321, Is it support  read and write mode via snmp ? 

 

Thanks,

Occasional Contributor II
Posts: 11
Registered: ‎07-16-2014

Re: Juniper WLA-321 AP can manage on Airwave ?

The WLA-321 is a Thin AP and doesn't support direct management.

Best bet is to load the WLC800 MIB for the controller and manage it via that.

 

Ewan

Frequent Contributor I
Posts: 64
Registered: ‎07-16-2014

Re: Juniper WLA-321 AP can manage on Airwave ?

Luckily there isn't a huge amount of functional changes from the models that Airwave supports to the 321.  That said, we tested Airwave out on our current Juniper wifi infrastructure, and it's definitely got some glitches.  Controller clusters in particular seemed to confuse the hecke out of Airwave.

 

With the recent partnership announced between Juniper and Aruba, however, they have at least commited to cross platform monitoring, so in the nearish future you should be able to use Airwave for your day to day troubleshooting and monitoring.  For now, though, I'd plan on sticking with either managing the Juniper directly or via Ringmaster.

Guru Elite
Posts: 8,340
Registered: ‎09-08-2010

Re: Juniper WLA-321 AP can manage on Airwave ?

The cluster visibility issues are expected to fixed in Airwave 8.1

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: