Network Management

last person joined: 3 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

MAS snmp configuration for Airwave

This thread has been viewed 1 times

  • 1.  MAS snmp configuration for Airwave

    Posted Feb 10, 2014 02:28 PM

    Hi, I'm trying to set up SNMP on my S3500 Aruba switch, so that it can be monitored by Airwave.

     I tried configuring it on the switch and airwave is unable to poll the device.  The following is a (sanitized) version of my settings on Airwave.  Anyone know how to configure SNMP on the MAS for airwave?

     

    Airwave IP:  1.1.1.1

    Community String: AirWave
    Telnet/SSH Username: admin
    Telnet/SSH Password: abcd1234
    "enable" Password: 3nabl3
    SNMPv3 Username: snmp-user
    Auth Password: snmp-pass
    SNMPv3 Auth Protocol: sha
    Privacy Password: amp-snmp-pass
    SNMPv3 Privacy Protocol: des



  • 2.  RE: MAS snmp configuration for Airwave

    EMPLOYEE
    Posted Feb 10, 2014 02:46 PM

    Here's what I used:

     

    snmp-server view SNMP_VIEW_RO oid-tree 0 included
snmp-server group SNMP_RO_GROUP v3 priv read ALL
snmp-server user "airwave-ro" group SNMP_RO_GROUP v3 auth-prot sha ****** priv-prot des ******