Hi guys,
I have a Instant cluster made up of 16 IAPs. I have configured one of them, and the only change I made it to set the Installation Type from Default to Outdoor, and reboot this AP, nothing else.
After making this change, AirWave shows the message Mismatched, as showed below:
When I go to Instant Config I see the following:
b4:5d:50:c9:88:80 is the MAC address of the AP I made the change to. I don't understand the message "Config changes waiting to be applied" since when I made the change, I clicked apply and then rebooted the AP.
Within Instang Config > Access Points I see the following:
And when I select the AP I see parameters which I didn't change and they are set to default, as the name (the AP has a name and now shows the MAC address, and it had a static IP and now it shows by DHCP) and the uplink VLAN (it was 800 and now it shows the default VLAN 0):
And Installation Type keeps appearing as Default:
So what is happening? How can I have this configuration done correctly and get rid of the Mismatched message?
Please help.
Regards,
Julián