Network Management

Reply
Contributor I
Posts: 23
Registered: ‎06-18-2014

Removing Airwave from our wlan environment

Hello, Hope everyones day is going well,

 

I would like to remove our airwave server from our environment due to the trial expiring so i can manage our IAPs from their virtual controllers. Whenever i go to make an adjustment on the virtual controllers, it says that they are being managed by airwave. If i bring the airwave server offline, will i be able to manage the virtual controllers by themselves again? Any help with this will be appreciated, take care!

Aruba
Posts: 1,377
Registered: ‎12-12-2011

Re: Removing Airwave from our wlan environment

In Airwave, go to the Groups tab and then click on the Group(s) that the IAPs are being managed in.  In the Basic sub tab, toggle the Instant GUI to OFF.  That will revert the management mode to monitor only and then you should be able to go into the VCs and control them locally.

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Contributor I
Posts: 23
Registered: ‎06-18-2014

Re: Removing Airwave from our wlan environment

Thanks so much Seth for the quick response, When i go to the groups tab, it does not allow me to do anything, and complains about the license expiring. I am not sure how i would go about removing our IAP VCs from Airwave with our airwave trial expiring. Thanks again

Search Airheads
Showing results for 
Search instead for 
Did you mean: