Hello,
I have a high-density WLAN deployment, which consists of six CAP AP-304 APs in a small building. I added the APs to my floor plan.
Airwave
When I click on an access point right there and display Properties, the radio status of some access points is disabled for both radios (11ng and 11ac). No clients are connected to these access points.
Direct neighbors show working radios, on which clients are connected.
I attached a screenshot to demonstrate the issue.
It would be great if someone can tell me what is wrong.
WLC
I checked the radio behavior on the WLC with following command, which shows me that both radios are working:
show ap active ap-name <AP-Name>