Security

last person joined: 8 hours ago 

Forum to discuss Enterprise security using HPE Aruba Networking NAC solutions (ClearPass), Introspect, VIA, 360 Security Exchange, Extensions, and Policy Enforcement Firewall (PEF).
Back to discussions
Expand all | Collapse all

AP - Wired AP Profile - Switchport Mode - Tunnel

This thread has been viewed 2 times

  • 1.  AP - Wired AP Profile - Switchport Mode - Tunnel

    Posted Sep 13, 2016 11:57 AM

    Is it possible to configure a wired ap profile for the following scenario? Client connected to a RAP port with DHCP will be assigned to the access mode VLAN, but with a static IP address be assigned to another VLAN? I've tried setting up the profile with Switchport mode = tunnel and with various VLAN in the Access Mode VLAN, Trunk Mode Native VLAN and Trunk Mode Allowed VLANs and the only one that works is the Access Mode VLAN. If I configure NIC for an IP Address not in the Access Mode VLAN, I cannot ping the host from the controller, but the user-table shows the IP Address.

     

    Regards,

    Tony Marques



  • 2.  RE: AP - Wired AP Profile - Switchport Mode - Tunnel

    Posted Sep 13, 2016 12:04 PM

    Sorry in Trunk Switchport mode, only the Trunk Mode Native VLAN works. Trunk Mode Allowed VLANs doesn't seem to work.


    Regards,

    Tony Marques



  • 3.  RE: AP - Wired AP Profile - Switchport Mode - Tunnel

    Posted Sep 13, 2016 12:30 PM

    Please disregard this post. Thanks!!!


    Regards,

    Tony Marques