Security

Reply
Occasional Contributor I

CPPM Radius with LDAP question

Hi,

 

I have an Aruba Controller and a CPPM. I need to know if it is possible to configure this scenario:

 

- Configure a Radius server (CPPM) inside Aruba controller.

- Create a captive portal inside CPPM where users will must be enter user/pass.

- Once CPPM receives the user/pass introduced by users trhough CPPM's Captive Portal, It has to verfy it against an external LDAP server.

 

I need set the configuration flow of this scenario.  Could you help me?

 

Regards

 

 

Guru Elite

Re: CPPM Radius with LDAP question

What specifically do you need help with? This is a pretty standard setup.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor I

Re: CPPM Radius with LDAP question

Thank you for your reply.

 

I need to configure a SSID in the Aruba controller where users will be redirected to a captive portal inside CPPM to enter user and pass. To make it I understand that I have to:

 

- Creat a Captive Portal auth profile

- A server group

- Configure inside server group a Radius Server (CPPM)

- An user role

- A captive portal aaa profile

 

And at the end, associate all this profiles and roles to the SSID created on the Aruba Controller.

 

(Correct me If I'm wrong)

 

I need to know the configuration flow to configure the CPPM, I need that:

 

- Captive portal configured inside it.

- Controller association

- Once the controller init the authentication with its radius server (CPPM) and users have entered their credentials, I need that CPPM check this user/pass against an external LDAP server.

 

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: