Security

Reply
Contributor I

Captive Portal with WPA2

Hi Airheads,

How can i configure a Captive Portal with WPA2 Enterprise?. I'm trying to do it redirecting the WPA2 authenticated user to a role with captive portal, but the ssid don't work. Thanks in advance.

Re: Captive Portal with WPA2

So after the device gets place on the captive portal what will happen after that?

Just to understand what you are trying to accomplish .

You will need to add the redirect on the 802.1x default role the user will get after a successful Auth , you need to create a L3 Auth profile and attach the captive portal profile to the user-role
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor I

Re: Captive Portal with WPA2

I'm having a similar issue but i believe it's setup right.  

 

I have the L3 auth setup  - default role is the guest-cp-role and default guest role is also the same (just testing for now - simply want to get to captive portal web).  Login page is set to https://ip 

 

Under the AAA Profile I have initial role, MAC role, and 802.1X role all set to guest-cp-role

 

The guest-cp-role has the captive portal L3 auth under it and allows DHCP and 443 traffic only to that captive portal host.

 

I get on, am able to get an IP from that network, but can't telnet on 443 to that box or anything... any ideas on what I could've missed?  Thank you!

 

Contributor I

Re: Captive Portal with WPA2

Scratch that - I'll open up a new ticket as it can be a bit different than what this was. Thanks!

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: