Security

Reply
Occasional Contributor II
Posts: 10
Registered: ‎07-25-2011

Clearing CPPM endpoints

Anyone know if there's a way to bulk-delete endpoints ( even deleting all endpoints would be fine)  in CPPM

( i.e: other than 100 at a time)

Aruba
Posts: 113
Registered: ‎11-21-2011

Re: Clearing CPPM endpoints

You can use the cluster reset-database command from the CLI – this will wipe out other configuration settings though, unfortunately.

Aruba Employee
Posts: 367
Registered: ‎11-04-2011

Re: Clearing CPPM endpoints

The following setting may also be useful. In the Cluster-Wide Parameters (which is under Administration, Server Manager, Server Configuration), you can set cleanup intervals for unknown and for known/disabled endpoints that have not been used for the configured time:

clusterwide.PNG

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC.
Frequent Contributor I
Posts: 73
Registered: ‎08-12-2011

Re: Clearing CPPM endpoints

the change of cluster wide parameters delete Endpoint entries wich was stored in the past or does it only work for newly created endpoints?

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: