Security

last person joined: yesterday 

Forum to discuss Enterprise security using HPE Aruba Networking NAC solutions (ClearPass), Introspect, VIA, 360 Security Exchange, Extensions, and Policy Enforcement Firewall (PEF).
Back to discussions
Expand all | Collapse all

Clearpass COA issues on brocade switches.

This thread has been viewed 4 times

  • 1.  Clearpass COA issues on brocade switches.

    Posted Nov 07, 2017 03:42 PM

    Hello all, 

     

    I'm trying to setup COA on clearpass so after a device gets profiled the port they're on gets bounced and then they get put into the correct vlan. Right now when i try to a manual COA from access tracker it says "Insufficent Paramaters Received"  I've based my COA profile off of another post that i've seen here but no luck.  Also i have the Enable Radius CoA: Checked on the device profile and I have it enabled on the switch.  I'll attach some screenshots 



  • 2.  RE: Clearpass COA issues on brocade switches.

    EMPLOYEE


  • 3.  RE: Clearpass COA issues on brocade switches.

    Posted Nov 07, 2017 05:03 PM
      |   view attached

    I was referencing that to make my Enforcement Profile.  I'm thinking that it has something to do with the NAS-Identifier (32) which is supposed to be the port according to brocade, however on the screenshot it's showing up as the name of the switch... I'm not sure what i'm missing here.  Has anyone set this up on brocades before?