Security

Reply
Frequent Contributor I
Posts: 67
Registered: ‎02-24-2010

Combining Enable If and Validation

Is it possible to combine Enable If and Validation on fields in Guest? I can happily have the field visible based on other fields, but if that field is enabled (by default) but not visible, when validation input is required, it fails on submission because no data has been added to the not visible field.

 

Example, dropdown field selection has two options, mobile and email. If you select mobile, the visitor_phone field is displayed requiring nwaSMSisvalid... validation etc...

Any amount of Kudos will be greatly appreciated!!!
Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: Combining Enable If and Validation

Have you tried setting an initial value in there (that might pass validation) if it isn't visible upon the submittal of the form?

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Frequent Contributor I
Posts: 67
Registered: ‎02-24-2010

Re: Combining Enable If and Validation

That will work, but it is not ideal as the customer wants the visitor_phone field in the guest account list view.

Any amount of Kudos will be greatly appreciated!!!
Occasional Contributor I
Posts: 9
Registered: ‎04-13-2015

Re: Combining Enable If and Validation

I have the same problem as you. Have you fixed this?

Search Airheads
Showing results for 
Search instead for 
Did you mean: