Hello
my scenario is:
DHCP Server IP : 10.236.40.23/ 24
Wifi Clients on LAN : 10.250.250.x/24.
Client IP Assignment: Network assigned
Well everything works fine if I didn't use the Access rules (i.e. client receive the correct IP for LAN 10.250.250.x/24)
But I need to filter traffic from this network and permit only RDP traffic from Clients to RDP server with IP : 10.236.40.11, so i set the rules (in attached) but clients don't receive the IPs from DHCP server.
where is my mistake?