Security

Reply
MVP
Posts: 3,009
Registered: ‎10-25-2011

EAP TLS deployment

Hello everyone again

I have got a question regarding this... i have finally configured in a laboratory the EAP TLS with a windows server 2008 R2

 

Now i have got a question... i have seen that you can terminate the eap tls on the controller

What is the exactly funtion of this... i mean why would we want to do this? is there is a reason or special scenario this is needed?  i have been searching but with no luck...

 

All comments are welcome :)

 

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Guru Elite
Posts: 21,270
Registered: ‎03-29-2007

Re: EAP TLS deployment

From an Airheads Talk by Jon Green:

 

"EAP termination moves the TLS (crypto) processing to the controller.  The EAP session is terminated here, and the controller uses hardware crypto acceleration to make sure performance remains high."

 

Please see the Advanced WLAN Security Presentation from Airheads Las Vegas here:  http://community.arubanetworks.com/t5/Community-Knowledge-Base/Advanced-Wireless-LAN-WLAN-Security/ta-p/29388

 

 

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

MVP
Posts: 3,009
Registered: ‎10-25-2011

Re: EAP TLS deployment

Nice! Collin

Thank you very much

Ill give it a reading hoping there is no more questions to ask to not to bother you :)

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Search Airheads
Showing results for 
Search instead for 
Did you mean: