Security

Reply
Contributor I
Posts: 29
Registered: ‎05-09-2013

How to Profile a device with statip IP address, with no forwarding DHCP request

How can I profile Printers with configured static IP address without subnet scanning and SNMP settings in the switch? Thanks

Contributor I
Posts: 29
Registered: ‎05-09-2013

Re: How to Profile a device with static IP address, with no forwarding DHCP request

Hi, Using the SNMP printer sometimes  can be/ cannot be profile.  I used SNMP configuration since the network printer is configured with static IP address and cannot be profiled via dhcp fingerpringting. Is there any best practice to profile a device configured with static IP address? Thanks

MVP
Posts: 4,236
Registered: ‎07-20-2011

Re: How to Profile a device with static IP address, with no forwarding DHCP request

[ Edited ]

 

You should probably use the HTTP user-agent if the device supports it 

 

These are the different ways you can collect :

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor I
Posts: 29
Registered: ‎05-09-2013

Re: How to Profile a device with static IP address, with no forwarding DHCP request

The customer dont want to enable http/https service at the switch. The solution we got is to do subnet scanning to profile the device. Thanks

Search Airheads
Showing results for 
Search instead for 
Did you mean: