Security

Reply
Occasional Contributor II

Is there to configure a Juniper switch to redirect traffic to Clearpass Captive portal?

So far I have configured 802.1X with Posture NAP It worked well, but I can not figure out how to redirect traffic from Juniper switch to the captive portal URL, and if so, which type of services should be configured? Thanks a lot in advance

Moderator

Re: Is there to configure a Juniper switch to redirect traffic to Clearpass Captive portal?

Currently EX switches don't support external captive portal. We actively working with JNPR on this and my understanding is support is due later this year.... your mileage may differ on those dates, but I'm very optimistic about this.


Best Regards
-d

ClearPass Product Manager

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Frequent Contributor I

Re: Is there to configure a Juniper switch to redirect traffic to Clearpass Captive portal?

I might be wrong but Juniper has some white papers like this one:
http://www.juniper.net/documentation/en_US/junos12.1/topics/example/authentication-captive-portal.html

Thanks

Re: Is there to configure a Juniper switch to redirect traffic to Clearpass Captive portal?

that seems to a local captive portal aboj and the question is how it interacts with also dot1x on ports.

Re: Is there to configure a Juniper switch to redirect traffic to Clearpass Captive portal?

Hi Danny,

 

I wanted to follow up on this thread from earlier in the year to see if you've had success setting up an external captive portal in recent versions of JUNOS?

 

Thanks!

 

-Mike

New Contributor

Re: Is there to configure a Juniper switch to redirect traffic to Clearpass Captive portal?


dannyjump wrote:

Currently EX switches don't support external captive portal. We actively working with JNPR on this and my understanding is support is due later this year.... your mileage may differ on those dates, but I'm very optimistic about this.


@dannyjump
Do you have any update on this?  I got the same answer from Juniper about being ready by the end of 2015 but have not heard anything since.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: