Security

Reply
Occasional Contributor II
Posts: 16
Registered: ‎01-11-2016

Juniper Trapeeze Controller authentication with CPPM

Having issuse using Captive Portal with MAC caching for Juniper Trapeeze AP's.  The authentication does work if we after initial try we turn off the client WiFi and then trun it back on.  The second attempt works because of the MAC caching. 

 

Any assistance would be much appreciated...

 

MVP
Posts: 4,020
Registered: ‎07-20-2011

Re: Juniper Trapeeze Controller authentication with CPPM

How are you doing the intial auth and what attribute are you sending back ?

Can you take a screenshot of the webauth ?

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II
Posts: 16
Registered: ‎01-11-2016

Re: Juniper Trapeeze Controller authentication with CPPM

we are actually on with support now. He has remote control of the PC.


We setup the pre-auth check to Radius to allow for the MAC to be cached.

Controller Initiated - require user name and credentials (we did try all options here)


Hopefully he resolves it and I can update all


Lou Occhicone, Jr.

WLAN Sales \ Design Engineer \ Systems Engineer

Aruba ACMP, ACCP \ Avaya ACSS \ Nortel ACDS

908-914-7704
Occasional Contributor II
Posts: 16
Registered: ‎01-11-2016

Re: Juniper Trapeeze Controller authentication with CPPM

support provided the attached document which got it resolved

Search Airheads
Showing results for 
Search instead for 
Did you mean: