Hi to all,
I have a issue with synchronizing radius server key from master to local WLC.
Basically all config is synchronized but key on WLC2 for Radius server is Changeme:
#show aaa authentication-server radius server-radius
RADIUS Server "server-radius"
----------------------------
Parameter Value
--------- -----
Host 10.0.252.36
Key Changeme
Key can not be changed/added on WLC2 as it is Master-Standby configuration. I tried to save configuration/wr mem on WLC1 but key stayed the same.
#show switches
All Switches
------------
IP Address Name Location Type Version Status Configuration State Config Sync Time (sec) Config ID
---------- ---- -------- ---- ------- ------ ------------------- ---------------------- ---------
10.20.132.8 wlc1 1IFC.20F master 6.1.3.13_43996 up UPDATE SUCCESSFUL 0 1016
10.20.132.7 wlc2 1IFC.20F local 6.1.3.13_43996 up UPDATE SUCCESSFUL 9 1016
Is there any special command to trigger synchronization of Radius servers or what should be next step in troubleshooting?
Thanks in advance.