Security

Reply
Occasional Contributor I
Posts: 6
Registered: ‎01-27-2016

SSH to Clear Pass in Data Port

Hi All,

I want that using SSH connect to Clear Pass in Data Port. I know the default rule will deny SSH in Data Port, So What can i do this action  ?

 

Thank a lot!

 

Moderator
Posts: 492
Registered: ‎11-09-2012

Re: SSH to Clear Pass in Data Port

We see this as a security and design weakness and do not allow it.

 

SSH is only supported on the MGMT port. Please raise a feature enhancement. 


Best Regards
-d

Snr Tech Marketing Engineer - ClearPass

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
New Contributor
Posts: 2
Registered: ‎03-01-2016

Re: SSH to Clear Pass in Data Port

I'm an Aruba SE for the DoD and 9/10 the management port is not used, so they are just hanging in the wind for the ability to SSH?

 

Thanks

Phil

Moderator
Posts: 492
Registered: ‎11-09-2012

Re: SSH to Clear Pass in Data Port

It's mandatory to configure the MGMT port, said another way it's impossible to configure just the DATA port so the MGST port will always have an IP address.

 

If you need to SSH to a CPPM node on the DATA port, this will require an ER to our system. I've raised the request into the ER system to selectively enable/support SSH over the DATA port.


Best Regards
-d

Snr Tech Marketing Engineer - ClearPass

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Search Airheads
Showing results for 
Search instead for 
Did you mean: