Security

Reply
Contributor II
Posts: 49
Registered: ‎11-23-2014

dot1x authenitcation problem

Hi All,

   We are deploying wifi network for a school campus. We have encounter with following authentication errors when not using termination:

 

Dec 1 22:27:37authmgr[3487]: <522275> <ERRS> |authmgr| User Authentication failed. username=dot1xtest userip=0.0.0.0 usermac=50:46:5d:1e:c4:2f servername=10.3.1.13 serverip=10.3.1.13 apname=DSG03AP08 bssid=94:b4:0f:97:e1:a0
Dec 1 22:27:37authmgr[3487]: <132207> <ERRS> |authmgr| RADIUS reject for station dot1xtest 50:46:5d:1e:c4:2f from server 10.3.1.13.
Dec 1 22:27:37authmgr[3487]: <132053> <ERRS> |authmgr| Dropping the radius packet for Station 50:46:5d:1e:c4:2f 94:b4:0f:97:e1:a0 doing 802.1x
 

 

There is no event show up in the event viewer of Microsoft Radius Server.

 

When the termination is enabled, the authenitcation is success.

 

Please help to provide some hints to the problem.

 

Thank you for the help!

 

Regard,

WIlson

Guru Elite
Posts: 20,329
Registered: ‎03-29-2007

Re: dot1x authenitcation problem

[ Edited ]

Did you issue your radius server a server certificate?  If it does not work without termination, that is the reason.

 

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor II
Posts: 49
Registered: ‎11-23-2014

Re: dot1x authenitcation problem

Colin,

  Thank you for the quick reply. Do you have any link on how to issue the Server Certification on IAS?

 

 Using the AAA tester on the controller to test the Radius Server was success.

 

Regards

Wilson

Guru Elite
Posts: 20,329
Registered: ‎03-29-2007

Re: dot1x authenitcation problem

The link to set NPS up is here:  http://community.arubanetworks.com/t5/Community-Tribal-Knowledge-Base/Step-by-Step-How-to-Configure-Microsoft-NPS-2008-Radius-Server/ta-p/80672

 

The AAA test server function does not test if the certificate portion of the server is setup correctly.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: