Security

Reply
Contributor II
Posts: 37
Registered: ‎07-05-2012

need to block the vrrp packet to the station via RAP5

Hi

 

Our customer need to block the vrrp packet from Aruba Controller to Wired station via RAP5.

Controller's and client's VLAN is same VLAN.

So the Station get the VRRP Multicast packet.

 

But our customer need to block the packet on the Station.

 

Do you have any solutions?

 

We tried, make the ACL and assign the role, but not blocked the VRRP packet.

 

Kosuke

kosuke
ACMP
Aruba
Posts: 1,643
Registered: ‎04-13-2009

Re: need to block the vrrp packet to the station via RAP5

Not sure if you have tried this, but there is the ability to block broadcast traffic to a Wired AP profile.  Have you tried to disable this on the profile that is assigned ot the Ethernet interface on the RAP-5?

 

Commands:

config t

ap wired-ap-profile <profilename>

no broadcast

 

or simply uncheck the Broadcast checkbox in the GUI.

 

 

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Contributor II
Posts: 37
Registered: ‎07-05-2012

Re: need to block the vrrp packet to the station via RAP5

Hi clembo,

 

Thank you for your info.

I already tried that, but not blocked the VRRP packet.

 

Kosuke

kosuke
ACMP
Search Airheads
Showing results for 
Search instead for 
Did you mean: