Security

Reply
Occasional Contributor II
Posts: 18
Registered: ‎04-27-2016

"Failed to get value for attributes: MAC Vendor"

Access tracker gives the alert message "Failed to get value for attributes: MAC Vendor" but the Endpoint repository provides the MAC Vendor information.  I need to get the MAC Vendor info to show up in Access Tracker so that my Role Mapping will work properly. Endpoints Repository and Insight are my authorization sources.

 

Thanks

 

MVP
Posts: 4,307
Registered: ‎07-20-2011

Re: "Failed to get value for attributes: MAC Vendor"

[ Edited ]

How are you profiling your endpoints in ClearPass ?

 

Typically you want to configure ClearPass as  DHCP relay under the Wireless Users Data VLAN

Here's the different options available :

http://community.arubanetworks.com/aruba/attachments/aruba/ForoenEspanol/653/1/ClearPass%20Profiling%20TechNote.pdf 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: