11-12-2015 04:41 AM
Hello to every one. I recentely took the ACMA (I am really happy). I have been studied by my self, However, I follow the lab book.
I always provisioned "create" a new Network/SSID just following thw WLAN/LAN Wizard wich was pretty much easy to understand, but just for learned purposes, I want to the same thing as the wizard does but manually and by my self.
I start to do it, but then I get lost :(
Could you guys help me on it please?
Solved! Go to Solution.
11-12-2015 05:26 AM
One thing you can do, is run through another wizard. Then when you complete the wizard look over the summary. you can open the GUI in another wizard the start working. When you get stumped you can check the summary from the wizard to get back on track.
11-12-2015 05:35 AM
Another method you can do is:
Still do the wizard-
At the summary click the link"Commands to be pushed" this will show you all of the configurations you will need to do. you can then copy this and drop it in a note somewhere and you can then do a step by step manual network configuration.
11-12-2015 07:06 AM
I see your using a 200. The options I suggested were based off of later versions of code. Here is what I had mentioned. Ill send you the CLI list
11-12-2015 08:42 AM
Now I can see, I didn't realize it so far. Well, I will try to do it in one controller running 6.4 firmware and check what would be the step by step on CLI. However, with your help, I was able to configured what wanna to.
Thank you so much for your help Jamie. :)