03-18-2012 08:39 PM
There are some eLearning modules listed in the training section of the website.
Please see screen shot (attachment) for location.
Are these the modules you were speaking of seeing in the past ?
03-19-2012 01:15 AM - edited 03-19-2012 01:16 AM
thanks, i did find those, but i believe there was something more general in the past, wasn't that long ago, perhaps 1-2 months.
i will check those eLearning modules, but it seems they focus on the configuration and less on the general concept of the s3500.
03-19-2012 11:11 AM
Sure no worries Mr. Yard. ;)
Each S3500/S2500 'consumes' the same licenses that an access point (AP) does from the controller. (e.g. one license of each 'flavour' on the controller.)
If you 'stack' the LAN switches together then each stack 'consumes' the same licenses that an access point (AP) does from the controller. (e.g. more efficient in terms of licensing)
09-04-2013 11:45 AM
When using Tunneled-Node, each standalone Mobility Access Switch consumes one AP license. An ArubaStack of Mobility Access Switches also just consumes one AP license irrespective of ports used or number of members. However the more ports being used, the more traffic being sent to the controller.
09-04-2013 11:47 AM
1 AP license per switch or stack.
Tim Cappalli | @tcappy0707 | about.me/timcappalli
Sr. Mobility Solutions Architect / Wireless Practice Lead
Integration Partners | ACMX #367 / CWSP / CWNA / ACCP / ACSP
[If you found my post helpful, please give kudos]