Wired Intelligent Edge (Campus Switching and Routing)

Reply
New Contributor

Dynamic voice VLAN assignment

Dear All,

 

Is it possible to enable dynamic voice vlan assignment on switch Aruba 3810M (ROM Ver: KB.16.01.0008)? Scenario: Users are authenticated via 802.1x and ipphones are authenticated via MAB thru radius server. I have ipphones form 2 different vendors and i would like them to use differen VLANs - let's say after connecting to switch Cisco ippohne will be assigned to vlan 90 and after connecting Alcatel ipphone to same port will be assigned to vlan 100.

 

Is it possible?

Thanks for any help!

Aruba Employee

Re: Dynamic voice VLAN assignment

Greetings!

 

Can you please share your config?  I'll replicate the issue in my lab and confirm the findings.

 

Thank You,

Pri

Priyank Patel
Frequent Contributor II

Re: Dynamic voice VLAN assignment

If you are using ClearPass, you can create a policy like:

Authorization:Endpoint Repository equals VoIP Phone AND

Connection:Client-Mac-Vendor equals Cisco

Then assign Enforcement profile for VLAN 90

 

Authorization:Endpoint Repository equals VoIP Phone AND

Connection:Client-Mac-Vendor equals Alcatel

Then assign Enforcement profile for VLAN 100

 

For this policy to work, make sure DHCP profiling is working with ClearPass.

JayBee
ACDX | ACCX| CCIE (RnS/SP,DC) | ACCP | ACMP | ACSA | ACMA | JNCIS | JNCIA
If the provided solution resolves your issue, please mark it as accepted solution to help others.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: