Wired Intelligent Edge

last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

HP ARUBA 2930F SWITCH

This thread has been viewed 3 times

  • 1.  HP ARUBA 2930F SWITCH

    Posted Feb 23, 2018 06:16 PM

    Hi, 

     

    I am new to this community and wanted to learn more about hp switches

    Currently we have hp 2930 as stacks using chain topolgy.

    We have several vlan setups.

    I am struggling to configure member 2 in the stack through the commander.

    For example if I want to configure a port which is located on switch member 2 port 2/34 onto (vlan office) from (Vlan Reception) what are the commands. 

    If someone can tell me step by step commands please much appreciated.

     

    Regards



  • 2.  RE: HP ARUBA 2930F SWITCH

    MVP EXPERT
    Posted Feb 24, 2018 06:17 AM

    Are these all part of the same VSF?



  • 3.  RE: HP ARUBA 2930F SWITCH

    EMPLOYEE
    Posted Feb 26, 2018 05:11 AM

    On ArubaOS switches, you configure the VLAN and then attach ports to it either untagged or tagged.


    For example if your Office VLAN is VLAN2, and port 1/8, 2/2 through 2/5 must be access ports in that VLAN, and port 1/5 is the (tagged) uplink, the config could be like this:

    vlan 2
   name "Office"
   untagged 1/8,2/2-2/5
   tagged 1/5
   ip address 10.254.1.1 255.255.255.0
   exit

    Is that what you are looking for?