Hi,
I'm having problems to TFTP image files using a 2530 switch.
My TFTP server is located on another subnet.
If I TFTP from my Cisco switches on the same network, it's working fine.
However, I actually can TFTP configuration files using the 2530.
Is this a software bug?
----------------------------------------------------------------------------------------
HP-2530-8G-PoEP# show system information
Status and Counters - General System Information
System Name : HP-2530-8G-PoEP
System Contact :
System Location :
MAC Age Time (sec) : 300
Time Zone : 0
Daylight Time Rule : None
Software revision : YA.16.05.0004 Base MAC Addr : e0071b-340ca0
ROM Version : YA.15.20 Serial Number : CN68FP53DN
Up Time : 18 hours Memory - Total : 67,108,864
CPU Util (%) : 1 Free : 39,058,240
IP Mgmt - Pkts Rx : 27,512 Packet - Total : 3022
Pkts Tx : 27,407 Buffers Free : 2895
Lowest : 2884
Missed : 0
----------------------------------------------------------------------------------------
HP-2530-8G-PoEP# copy tftp config new_config.cfg 172.18.20.51 J9774A.cfg
HP-2530-8G-PoEP#
HP-2530-8G-PoEP# show config
config
new_config.cfg
----------------------------------------------------------------------------------------
HP-2530-8G-PoEP# copy tftp flash 172.18.20.51 YA_16_04_0011.swi secondary
The secondary image will be deleted.
Continue (y/n)? y
000M Request failed.
HP-2530-8G-PoEP#
HP-2530-8G-PoEP# show log -r
Keys: W=Warning I=Information
M=Major D=Debug E=Error
---- Reverse event Log listing: Events Since Boot ----
W 01/01/90 18:31:15 00137 tftp: Request failed.
Thanks!
Oscar Bengtsson