Wired Networks

How to disable all LCD menu functions and individual LCD menu functions in 7xxx series controller

This article applies to all the 7xxx series controller.

 

Disabling LCD Menu Functions
 
For security purpose, you can disable all LCD menu functions by disabling the entire menu functionality using the following command:
 
(host) (config) #lcd-menu
(host) (lcd-menu) #disable menu
 
rtaImage (3).jpg
 
To prevent inadvertent menu changes, you can disable LCD individual menu function using the following commands:
 
(host) (lcd-menu) #disable menu maintenance ?
 
factory-default Disable factory default menu
media-eject Disable media eject menu on LCD
system-halt Disable system halt menu on LCD
system-reboot Disable system reboot menu on LCD
upgrade-image Disable image upgrade menu on LCD
upload-config Disable config upload menu on LCD
 
rtaImage (4).jpg
 
To display the current LCD functionality from the command line, use the following command:
 
(host) (config) #show lcd-menu
 
lcd-menu
--------
Parameter Value
--------- -----
menu maintenance upgrade-image partition0  enabled
menu maintenance upgrade-image partition1  enabled
menu maintenance upgrade-image                 enabled
menu maintenance upload-config                   enabled
menu maintenance factory-default                  enabled
menu maintenance media-eject                      enabled
menu maintenance reload-system                  enabled
menu maintenance halt-system                     enabled
menu maintenance                                       enabled
menu                                                         enabled
 
rtaImage (5).jpg
rtaImage (6).jpg
Version History
Revision #:
1 of 1
Last update:
‎11-04-2014 12:45 PM
Updated by:
 
Labels (1)
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.