How to upgrade Mobility access switch firmware through Activate?
How to upgrade the Mobility access switch firmware through Activate?
Activate Firmware Services:
This service enables the Mobility Access Switch to automatically contact the Activate server and check for any few image version
#show activate-service-firmware activate-service-firmware (N/A) ------------------------------- Parameter Value --------- ----- Activate Firmware Service Enabled
This feature is enabled by default
To disable the activate firmware services, issue the command
(config) #activate-service-firmware no enable
Commands to upgrade :
#activate firmware check/upgrade
If the Activate firmware service is enabled, the activate firmware check command enables the switch to automatically check Activate to see if there is a new image version .
If a new version is available, the activate firmware upgrade command prompts the Mobility Access Switch to attempt to download and upgrade to the new image
(ArubaS1500-12P) #activate firmware check (ArubaS1500-12P) #activate firmware upgrade Image Version for upgrade: 184.108.40.206_54198 Do you want to proceed with the upgrade [y/n]: