Wireless Access

Reply
Occasional Contributor II
Posts: 80
Registered: ‎01-16-2016

5ghz clients connecting to 2.4 Ghz

Hi,

Sometimes when client roaming  5ghz  its connecting to  2.4 Ghz .

What could be the reason . Since the client  decide  where to connect  ,can we change the behaviour . 

What is inter-band roaming 

 

Thanks

MVP
Posts: 952
Registered: ‎04-13-2009

Re: 5ghz clients connecting to 2.4 Ghz

There could be lots of reasons. One reason could be: if DFS channels are being used, the client might not support them. Worth checking...

 

Cheers

James

Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Occasional Contributor II
Posts: 80
Registered: ‎01-16-2016

Re: 5ghz clients connecting to 2.4 Ghz

[ Edited ]

Hi,

I am not using any dfs channels . This could be the client listens 2.4 signal better than  5 Ghz? 

This happens when client  roam .

Thanks

Search Airheads
Showing results for 
Search instead for 
Did you mean: