Wireless Access

Reply
Regular Contributor I

802.1x fall through to captive portal w/o switch config

Is there a way to configure for 802.1x fallthrough to captive portal using just controller features, no switch in the middle configired for fall-through?

 

Mike

Guru Elite

Re: 802.1x fall through to captive portal w/o switch config

802.1X on wireless doesn't have a fall through state, it's either pass or fail. The only way you could fail to a captive portal would be it authentication passes, but an authorization decisions returns a role with a captive portal.


Thanks,
Tim

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Regular Contributor I

Re: 802.1x fall through to captive portal w/o switch config

Thanks Tim. I knew this is how it works in wireless but wasn't sure if the conroller had fall through capabilities for wired endpoints similar to that of large switch vendors (try .1X, if no EAP start then proceed to CP redirect to URL..).

 

Mike

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: