Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AAA 802.1x for the AP itself possible?

This thread has been viewed 0 times

  • 1.  AAA 802.1x for the AP itself possible?

    Posted May 21, 2014 07:55 AM

    Hello,

     

    it is an requirement, that the AP itself makes a 802.1x authentication on the connected switchport (TLS with client cert or TTLS with username/password).

    Is that possible and how? (for IAP or CAP). I hope my question is clear to understand (this is not for client athentication).

     

    Best regards

    Jens



  • 2.  RE: AAA 802.1x for the AP itself possible?
    Best Answer

    EMPLOYEE
    Posted May 21, 2014 07:57 AM

    I don't believe Instant currently has an 802.1X supplicant.

     

    For a campus AP, you enter 802.1X credentials on the provisioning screen under "802.1X Parameters using PEAP". Currently only PEAP is supported.

     

    ap-peap.png

     

     

    (master) (config) #provision-ap
(master) (AP provisioning) # apdot1x-username <username>
(master) (AP provisioning) # apdot1x-passwd <password>

     



  • 3.  RE: AAA 802.1x for the AP itself possible?

    Posted May 21, 2014 08:22 AM

    Thank you very much. That was fast!

     

    Best regards

    Jens