Wireless Access

Reply
Contributor I
Posts: 26
Registered: ‎02-28-2014

AOS path from 6.4.3.11 to v8 on 7220

In order to accommodate our new 303H APs, I'm looking to upgrade our 7220 controllers to AOS8. Our two controllers (master/standby) are running 6.4.3.11. Is there a preferred path to v8? I have a few maintenance windows to work with so I can go to 6.4.4 and 6.5 first if it helps.


Mike Naylor
The College of Wooster
MVP
Posts: 4,301
Registered: ‎07-20-2011

Re: AOS path from 6.4.3.11 to v8 on 7220

303H is only currently supported on 6.5.2.x
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor I
Posts: 26
Registered: ‎02-28-2014

Re: AOS path from 6.4.3.11 to v8 on 7220

The spec sheet says ArubaOS™ 6.5.2.0/8.2.0.0.

http://www.arubanetworks.com/products/networking/access-points/303h/

 


Mike Naylor
The College of Wooster
MVP
Posts: 4,301
Registered: ‎07-20-2011

Re: AOS path from 6.4.3.11 to v8 on 7220

AOS 8.2.x is not out yet
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor I
Posts: 26
Registered: ‎02-28-2014

Re: AOS path from 6.4.3.11 to v8 on 7220

On the path to 6.5.2 then, can I upgrade directly to that version or should I go through 6.4.4?


Mike Naylor
The College of Wooster
MVP
Posts: 4,301
Registered: ‎07-20-2011

Re: AOS path from 6.4.3.11 to v8 on 7220

You can upgrade directly to AOS 6.5.2.x from ArubaOS 6.0.1.0 or later version of ArubaOS 6.x
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: