Wireless Access

Reply
Frequent Contributor II
Posts: 125
Registered: ‎11-06-2007

AP 104 and ANT-18

Hello,

I want to install AP 104 with external antenna-18 using only one spatial stream (chain 0), do I connect ANT-18 to R0/A0 and R1/A0 using both 2.4HGz and 5GHZ??.

 

Can I use any cable from ANT-18 except the central cable interchangeably to connect to port R0/A0 and R1/A0?

 

Is there some way to disable chain 1 for AP 104??.

 

What is the correct configuration to do it?.

 

Thank you

Valued Contributor II
Posts: 804
Registered: ‎12-01-2014

Re: AP 104 and ANT-18

Hi Friend,

 

Here is the method to identify and connect Ant-18 to AP104,

 

 

AP 104 has 4 connectors which are used for external antennas and out of 4 connectors; 2 for each band/radio.


User-added image
Antenna connector mapping:

R0/A0: Radio 0 (5 GHz), chain 0
R0/A1: Radio 0 (5 GHz), chain 1
R1/A0: Radio 1 (2.4 GHz), chain 0
R1/A1: Radio 1 (2.4 GHz), chain 1

Comming to Ant-18 connections,

 

Ant-18.JPG

 

Hope got clarity on this,

 

If my reply is usefull, please give kudos :)

 

Please feel free to comeback for any further assistance on this.

 

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
Frequent Contributor II
Posts: 125
Registered: ‎11-06-2007

Re: AP 104 and ANT-18

Hello,

 

Do I need some special configuration at controller to disable chain 1 for AP 104??.

 

Thank you

Valued Contributor II
Posts: 804
Registered: ‎12-01-2014

Re: AP 104 and ANT-18

Hi,

 

Yes we can disable chain as per our requirement. in fact it should not create any issue.

 

you will find that option in the AP provisioning page as shown in the picture,

 

 

AP provisioning.JPG

 

Hope you got it.

Please feel free for any further assistance on this,

 

Don't forget to give Kudos if you got your answer :)

 

 

 

 

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
Search Airheads
Showing results for 
Search instead for 
Did you mean: