12-01-2016 10:38 AM
A brand new out of the box AP205h does not appear to boot.
The "System Status" LED continuously blinks (never goes steady green.)
The AP does get an IP from DHCP but we cannot connect to it with any protocol (http, https, SSH.) (We find the IP via the ARP table in our router.)
The AP does not announce an "Instant" SSID.
We tried a factory reset with no change.
We try looking for the AP as an unprovisioned AP on our controller but it does not appear.
We don't have the proprietary console cable.
What else can we try to configure this thing?
12-01-2016 10:56 AM
Didn't realize there is a difference.
It's an AP, not an IAP (which explains why no Instant SSID or Web GUI.)
It did finally appear as an un-provisioned AP on our controller.
We ultimately want it to be a RAP.
Can this version be converted to a RAP?
for the connected age
450 West 33rd Street, 12th Floor, New York, NY 10001, USA
www.rga.com www.twitter.com/rga www.facebook.com/rga
This message contains information which may be confidential and privileged. Unless you are the intended recipient (or are authorized to receive this message on behalf of the intended recipient), you may not copy, disseminate, or disclose this message or any information contained in this message. If you have received this message in error, please notify the sender by reply e-mail or forward the message to email@example.com and delete the message. Thank you very much.