I have a WLAN network with one CTRL 7210 running 6.5.2.1 upgraded from the 6.5.1.5
Before the upgrade, all the indoor AP-207 (72 = 12 APs in each one of the 6 buildings) were UP and only the Outdoor were down.
After the upgrade, the Outdoor 365-APs became UP but some of the Indoor one (2 per each buildings) are down.
In each building, we are using 2 Access Switches (HP 2530 - 8G) to connect and power the 12 Indoor APs.
It seems that when we did the upgrade, the indoor access points are consuming more energy and thus the Switch can’t power more than 5 APs !!! And that's what i found when i check the datasheets (Max PoE Budget of the Switch is 67 W while Max Power Consumption of the AP is 12 W)
Do you have an idea for this ? Can we disable some unnecessary 6.5.2.1 features that are consuming energy on the APs ?