Wireless Access

Reply
Occasional Contributor I
Posts: 8
Registered: ‎08-13-2013

AP 225 HT WLAN mode on 5GHz radio

I currently have a solid amber light on my 5GHz LED, and according to Aruba documentation this means that it's in non HT WLAN mode.  What config changes do I need to make to place it in HT WLAN mode?  I've already enabled Very High Throughput in the High-throughput SSID profile, but that doesn't seen to work.  Any suggstions?

MVP
Posts: 4,307
Registered: ‎07-20-2011

Re: AP 225 HT WLAN mode on 5GHz radio

Did you check under the RF profile ?

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor I
Posts: 8
Registered: ‎08-13-2013

Re: AP 225 HT WLAN mode on 5GHz radio

Yes, everthing HT is checked, yet the 5 GHz light remains amber.

MVP
Posts: 4,307
Registered: ‎07-20-2011

Re: AP 225 HT WLAN mode on 5GHz radio

if you do a show ap active | include <ap name>, what do you see ?

 

11a Ch/EIRP/MaxEIRP 
---- ----- ---------- ----------- 
 AP:HT:140/15/22.5

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor I
Posts: 8
Registered: ‎08-13-2013

Re: AP 225 HT WLAN mode on 5GHz radio

Here's the output from the show ap active cmd

 

capture.PNG

Guru Elite
Posts: 21,515
Registered: ‎03-29-2007

Re: AP 225 HT WLAN mode on 5GHz radio

The entire a radio is disabled on that access point.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: