Wireless Access

Reply
Contributor I
Posts: 44
Registered: ‎07-07-2014

AP-225 - two ethernet interface scenario

Hi,

 

I would like to configure two independent network: for employee and guest. I have two independent WAN connection so I would like to assign ETH0 interface to first WAN connection. This interface will be dedicated for employee. ETH 1 interface will be assigned to second WAN and dedicated for guest network. Is it possible using AP and controller or only IAP. If yes, how should I configure it?

Thanks in advance!

 

 

Regards,

Mathew

Guru Elite
Posts: 8,637
Registered: ‎09-08-2010

Re: AP-225 - two ethernet interface scenario

If you have a controller, the best bet would be to hook the second leg into
the controller, not the AP.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Contributor I
Posts: 44
Registered: ‎07-07-2014

Re: AP-225 - two ethernet interface scenario

How about IAP? Is it possible to do it without controller?

 

Regards,

Mathew

Contributor I
Posts: 44
Registered: ‎07-07-2014

Re: AP-225 - two ethernet interface scenario

Anybody help me resolve this issue?

Guru Elite
Posts: 21,269
Registered: ‎03-29-2007

Re: AP-225 - two ethernet interface scenario

Matthew0306,

 

That scenario is not supported.

 

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: