Wireless Access

Reply
Occasional Contributor II

AP 315 continuously rebooting on WLC 7205

Hello,

 

I have 1 AP which has some difficulties to register to the WLC.

he joined 1 time , and he was in flag 2ID which is dirty or no config, but how can it be possible ?

 

All the other AP's are ok by the way and can easily join the WLC...AP-issue.JPG

Guru Elite

Re: AP 315 continuously rebooting on WLC 7205

Type "show log system all" on the controller to see if you can get a clue.

 

Do you have the proper ArubaOS to support the AP315 installed?



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II

Re: AP 315 continuously rebooting on WLC 7205

Feb 10 06:09:02 KERNEL(GRB-ELL1-AP01@172.16.101.13): [ 233.221212] Resetting spectral chainmask to Rx chainmask
Feb 10 06:09:02 KERNEL(GRB-ELL1-AP01@172.16.101.13): [ 233.221337] Resetting spectral chainmask to Rx chainmask
Feb 10 06:10:15 :311500: <ERRS> |AP GRB-ELL1-AP01@172.16.101.13 sh| |ap| ^[msg login input passwd is not correct from console ]
Feb 10 06:11:07 :311500: <ERRS> |AP GRB-ELL1-AP01@172.16.101.13 sh| |ap| ^[msg login input passwd is not correct from console ]
Feb 10 06:12:39 :311500: <ERRS> |AP GRB-ELL1-AP01@172.16.101.13 sh| |ap| ^[msg login input passwd is not correct from console ]
Feb 10 06:15:04 :303022: <WARN> |AP GRB-ELL1-AP01@172.16.101.13 nanny| Reboot Reason: AP rebooted caused by cold HW reset(power loss)
Feb 10 06:15:13 :311500: <ERRS> |AP GRB-ELL1-AP01@172.16.101.13 sh| |ap| ^[msg login input passwd is not correct from console ]
Feb 10 06:15:45 KERNEL(GRB-ELL1-AP01@172.16.101.13): [ 100.300312] Disabling USB power
Feb 10 06:15:45 KERNEL(GRB-ELL1-AP01@172.16.101.13): [ 100.804686] 0x0 )
Feb 10 06:17:58 KERNEL(GRB-ELL1-AP01@172.16.101.13): [ 233.219306] Resetting spectral chainmask to Rx chainmask
Feb 10 06:17:58 KERNEL(GRB-ELL1-AP01@172.16.101.13): [ 233.219431] Resetting spectral chainmask to Rx chainmask
Feb 10 06:21:58 :303022: <WARN> |AP 34:fc:b9:c6:a9:3c@172.16.101.14 nanny| Reboot Reason: AP rebooted Fri Feb 10 06:04:15 PST 2017; SAPD: Rebooting after setting cert_cap=1. Need to open a secure channel(IPSEC)
Feb 10 06:22:42 KERNEL(34:fc:b9:c6:a9:3c@172.16.101.14): [ 104.948359] Disabling USB power
Feb 10 06:24:50 KERNEL(34:fc:b9:c6:a9:3c@172.16.101.14): [ 233.220993] Resetting spectral chainmask to Rx chainmask
Feb 10 06:24:50 KERNEL(34:fc:b9:c6:a9:3c@172.16.101.14): [ 233.221087] Resetting spectral chainmask to Rx chainmask
Feb 10 06:32:36 :311002: <WARN> |AP 34:fc:b9:c6:a9:3c@172.16.101.14 sapd| Rebooting: Rebooting after provisioning
Feb 10 06:32:36 :311002: <WARN> |AP 34:fc:b9:c6:a9:3c@172.16.101.14 sapd| Rebooting: SAPD: Rebooting after provisioning
Feb 10 06:32:36 :303086: <ERRS> |AP 34:fc:b9:c6:a9:3c@172.16.101.14 nanny| Process Manager (nanny) shutting down - AP will reboot!
Feb 10 06:34:04 :303022: <WARN> |AP GRB-ELL1-AP03@172.16.101.14 nanny| Reboot Reason: AP rebooted Fri Feb 10 06:32:36 PST 2017; SAPD: Rebooting after provisioning
Feb 10 06:34:46 KERNEL(GRB-ELL1-AP03@172.16.101.14): [ 101.124086] Disabling USB power
Feb 10 06:36:57 KERNEL(GRB-ELL1-AP03@172.16.101.14): [ 232.965698] Resetting spectral chainmask to Rx chainmask
Feb 10 06:36:57 KERNEL(GRB-ELL1-AP03@172.16.101.14): [ 232.965791] Resetting spectral chainmask to Rx chainmask
Feb 10 06:59:02 :303022: <WARN> |AP GRB-ELL1-AP02@172.16.101.15 nanny| Reboot Reason: AP rebooted caused by cold HW reset(power loss)
Feb 10 06:59:42 KERNEL(GRB-ELL1-AP02@172.16.101.15): [ 102.478944] Disabling USB power
Feb 10 06:59:43 KERNEL(GRB-ELL1-AP02@172.16.101.15): [ 102.995595] , 0x0 )
Feb 10 06:59:43 :303022: <WARN> |AP GRB-ELL1-AP03@172.16.101.14 nanny| Reboot Reason: AP rebooted caused by cold HW reset(power loss)
Feb 10 07:00:24 KERNEL(GRB-ELL1-AP03@172.16.101.14): [ 100.166791] Disabling USB power
Feb 10 07:01:55 KERNEL(GRB-ELL1-AP02@172.16.101.15): [ 235.270040] Resetting spectral chainmask to Rx chainmask
Feb 10 07:01:55 KERNEL(GRB-ELL1-AP02@172.16.101.15): [ 235.270165] Resetting spectral chainmask to Rx chainmask
Feb 10 07:02:37 KERNEL(GRB-ELL1-AP03@172.16.101.14): [ 233.219150] Resetting spectral chainmask to Rx chainmask
Feb 10 07:02:37 KERNEL(GRB-ELL1-AP03@172.16.101.14): [ 233.219243] Resetting spectral chainmask to Rx chainmask
Feb 10 07:18:28 :303022: <WARN> |AP GRB-AP01@172.16.101.11 nanny| Reboot Reason: AP rebooted Fri Feb 10 05:57:16 PST 2017; SAPD: Rebooting after provisioning
Feb 10 07:18:34 :303022: <WARN> |AP GRB-ELL1-AP01@172.16.101.13 nanny| Reboot Reason: AP rebooted caused by cold HW reset(power loss)
Feb 10 07:19:07 :311002: <WARN> |AP GRB-AP01@172.16.101.11 sapd| Rebooting: Rebooting after provisioning
Feb 10 07:19:07 :311002: <WARN> |AP GRB-AP01@172.16.101.11 sapd| Rebooting: SAPD: Rebooting after provisioning
Feb 10 07:19:14 KERNEL(GRB-ELL1-AP01@172.16.101.13): [ 99.949390] Disabling USB power
Feb 10 07:20:36 :303022: <WARN> |AP GRB-AP01@172.16.101.11 nanny| Reboot Reason: AP rebooted Fri Feb 10 07:19:08 PST 2017; SAPD: Rebooting after provisioning
Feb 10 07:21:16 :311002: <WARN> |AP GRB-AP01@172.16.101.11 sapd| Rebooting: Rebooting after provisioning
Feb 10 07:21:16 :311002: <WARN> |AP GRB-AP01@172.16.101.11 sapd| Rebooting: SAPD: Rebooting after provisioning
Feb 10 07:22:45 :303022: <WARN> |AP GRB-AP01@172.16.101.11 nanny| Reboot Reason: AP rebooted Fri Feb 10 07:21:17 PST 2017; SAPD: Rebooting after provisioning
Feb 10 07:24:48 :303022: <WARN> |AP 34:fc:b9:c6:a9:2a@172.16.101.11 nanny| Reboot Reason: AP rebooted Wed Dec 31 16:01:19 PST 1969; 'reboot' command executed with no reason given (called from ).
Feb 10 07:25:35 :311002: <WARN> |AP 34:fc:b9:c6:a9:2a@172.16.101.11 sapd| Rebooting: SAPD: Rebooting after setting cert_cap=1. Need to open a secure channel(IPSEC)
Feb 10 07:25:36 :303086: <ERRS> |AP 34:fc:b9:c6:a9:2a@172.16.101.11 nanny| Process Manager (nanny) shutting down - AP will reboot!
Feb 10 07:27:04 :303022: <WARN> |AP 34:fc:b9:c6:a9:2a@172.16.101.11 nanny| Reboot Reason: AP rebooted Fri Feb 10 07:25:36 PST 2017; SAPD: Rebooting after setting cert_cap=1. Need to open a secure channel(IPSEC)
Feb 10 07:27:43 :311002: <WARN> |AP 34:fc:b9:c6:a9:2a@172.16.101.11 sapd| Rebooting: Rebooting after provisioning
Feb 10 07:27:44 :311002: <WARN> |AP 34:fc:b9:c6:a9:2a@172.16.101.11 sapd| Rebooting: SAPD: Rebooting after provisioning
Feb 10 07:29:13 :303022: <WARN> |AP GRB-AP01@172.16.101.11 nanny| Reboot Reason: AP rebooted Fri Feb 10 07:27:44 PST 2017; SAPD: Rebooting after provisioning
Feb 10 07:29:52 :311002: <WARN> |AP GRB-AP01@172.16.101.11 sapd| Rebooting: Rebooting after provisioning
Feb 10 07:29:52 :311002: <WARN> |AP GRB-AP01@172.16.101.11 sapd| Rebooting: SAPD: Rebooting after provisioning
Feb 10 07:31:21 :303022: <WARN> |AP GRB-AP01@172.16.101.11 nanny| Reboot Reason: AP rebooted Fri Feb 10 07:29:53 PST 2017; SAPD: Rebooting after provisioning
Feb 10 07:32:01 :311002: <WARN> |AP GRB-AP01@172.16.101.11 sapd| Rebooting: Rebooting after provisioning
Feb 10 07:32:01 :311002: <WARN> |AP GRB-AP01@172.16.101.11 sapd| Rebooting: SAPD: Rebooting after provisioning
Feb 10 07:33:30 :303022: <WARN> |AP GRB-AP01@172.16.101.11 nanny| Reboot Reason: AP rebooted Fri Feb 10 07:32:02 PST 2017; SAPD: Rebooting after provisioning
Feb 10 07:34:09 :311002: <WARN> |AP GRB-AP01@172.16.101.11 sapd| Rebooting: Rebooting after provisioning
Feb 10 07:34:09 :311002: <WARN> |AP GRB-AP01@172.16.101.11 sapd| Rebooting: SAPD: Rebooting after provisioning
Feb 10 07:37:21 :303022: <WARN> |AP 34:fc:b9:c6:a9:2a@172.16.101.11 nanny| Reboot Reason: AP rebooted Fri Feb 10 07:34:10 PST 2017; SAPD: Rebooting after provisioning
Feb 10 07:39:37 :303022: <WARN> |AP 34:fc:b9:c6:a9:2a@172.16.101.11 nanny| Reboot Reason: AP rebooted caused by cold HW reset(power loss)
Feb 10 07:40:13 :311002: <WARN> |AP 34:fc:b9:c6:a9:2a@172.16.101.11 sapd| Rebooting: SAPD: Reboot after successful image upgrade
Feb 10 07:40:13 :303086: <ERRS> |AP 34:fc:b9:c6:a9:2a@172.16.101.11 nanny| Process Manager (nanny) shutting down - AP will reboot!

 

Not so much informations there...

 

What do you mean by having the proper ArubaOS ? I just upgraded the WLC to 6.5.0.3 and started to plugg all AP's

 

AL

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: