4 weeks ago
I am using an AP-367 to do surveys and cant get it to broadcast without the uplink. I have set it up as standalone but dont have the option "can be used without uplink" in the wlan settings.
How can i force it to broadcast without the uplink?
I have firmware version 220.127.116.11_61959 running on the AP
Solved! Go to Solution.
4 weeks ago - last edited 4 weeks ago
In InstantOS 6.5.4.x the feature is now called Out of service
(OOS) and you will see this under the WLAN Settings.
Enable or disable the SSID based on the following OOS states of the Instant AP: n VPN down n Uplink down n Internet down n Primary uplink down The network will be out of service when selected event occurs and the SSID is enabled or disabled as per the configuration settings applied.
Don't forget to set a static IP as well for the IAP and to also Enforce an Uplink (System > Uplink > Enforce Uplink: Ethernet).
ACMA, ACMP, ACSA
If my post addresses your query, give kudos:)