Wireless Access

Reply
Contributor II

AP-93H Wired Ports

Do I have to set the VAP profile to "bridged" in order to have the wired ports drop user traffic directly onto the LAN?  Also, we have multiple VLANs, so do I need to define those vlans on the contoller so the AP knows where to direct traffic on the LAN?  Thanks.

Guru Elite

Re: AP-93H Wired Ports

- yes, you do need to define them as bridged

- You don't necessarily have to define them on the controller, but in the Definition for the Wired AP port profile, you just type in the VLANs that will be allowed, Native VLAN, etc..

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor II

Re: AP-93H Wired Ports

Thanks for the info.

Guru Elite

Re: AP-93H Wired Ports

Wait,

 

You do NOT need to define the VAP as bridged to bridge wired traffic.  You ONLY need to define the forwarding mode as "Bridged" in the Wired AP profile.

 

Sorry for the misunderstanding.

 

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor II

Re: AP-93H Wired Ports

OK, that makes a huge difference.  Thanks for clearing that up.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: