Wireless Access

last person joined: 5 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP constantly rebooting after provisioning

This thread has been viewed 2 times

  • 1.  AP constantly rebooting after provisioning

    Posted Mar 29, 2017 10:23 PM

    Hi Support,

     

    When the AP is synched to the controller for the first time, the AP seems to act normally. But when I provision it with the AP group I created(no configured profiles yet), the AP seems to reboot constantly. I checked it in the CLI of the AP.

     

    The AP and Controller is isolated to our network. Is it controller issue? We tried synching different APs but it is still the same.

     

    Controller model: 7005

    AOS: 6.4.4.10

    AP Model: AP-215



  • 2.  RE: AP constantly rebooting after provisioning

    EMPLOYEE
    Posted Mar 29, 2017 10:36 PM
    Type "show log system 50" on the command line of the controller to see if there is a clue.