Wireless Access

last person joined: 19 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP's not changing channel

This thread has been viewed 2 times

  • 1.  AP's not changing channel

    Posted Sep 26, 2013 06:02 AM

    I have 3 AP93's depolyed in a portacabin structure, and they all appear to be on the same channel.

     

    As far as I can tell, this group of APs is using the same default valuse that other working APs are, so do I need to tweak some settings?  I could assume that perhaps ARM is not working properly, or the 3 APs are simply not seeing each other.

     

    Cheers



  • 2.  RE: AP's not changing channel

    Posted Sep 26, 2013 07:11 AM

     

    Are those APs to close to each other ?

     

    Make sure ARM is on ?

     

    Are users experiecing performance issues ?

     

     



  • 3.  RE: AP's not changing channel

    Posted Sep 26, 2013 09:28 AM

    Are those APs to close to each other ?      Should be close enough to see each other, but not too close

     

    Make sure ARM is on ?   Yes

     

    Are users experiecing performance issues ?  Yes, there are definately strange things goin on

     

     

    Is it possible to tell from an AP which other APs it is aware of?

     

     



  • 4.  RE: AP's not changing channel

    Posted Sep 26, 2013 11:23 AM

     

    You could run the following command :

     

    show ap monitor ap-list ap-name <apname>