Wireless Access

Reply
Occasional Contributor II

AP135 console parameters

Dear all:

 

We are working on a new installation AP135 / AP105 and S3500 having a remote controller.

 

All AP105 are reachable thru the console port 9600-N-8-1, nevertheless connecting the same cable using the same parameters to the AP135 doesn't work.

 

Any clue ?

Regards,

Nelson

 

Nelson La Rocca
B4B Corp.
Guru Elite

Re: AP135 console parameters

Make sure you are connecting to the serial port ;)


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Occasional Contributor II

Re: AP135 console parameters

Sure !

 

In fact, unplugging the connector from one AP105 to another I got immediate response in the TTY terminal, but doesn't happens the same when connected to the AP135


cjoseph wrote:

Make sure you are connecting to the serial port ;)




Nelson La Rocca
B4B Corp.
Guru Elite

Re: AP135 console parameters

Okay.  Try a different AP-135.  It should work exactly the same as the 105.  Make sure you have no flow control on...


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: