Wireless Access

Reply
Occasional Contributor I

AWN-A200 unable to ping

Hi,

 I am using this for a simple lab setup and testing. I cannot get this to ping anything. below is my network config. I am new to aruba and not sure if there is anythign else really needed for this to work.

 

 

setenv ipaddr 10.0.0.99

setenv netmask 255.255.255.0

setenv gatewayip 10.0.0.1

 

 

Guru Elite

Re: New to me AWN-A200 With No Image and Cant Load One

If ping does not work, switch the ethernet cable to a different port and try again.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I

Re: New to me AWN-A200 With No Image and Cant Load One

Hi,

The A200 only has one WAN, one LAN, and one Serial ports. I tried Lan already and nothing. I will give WAN a try.

Occasional Contributor I

Re: New to me AWN-A200 With No Image and Cant Load One

I have both wan and lan connect to different ports and still cannot get it to ping anything is there another option for me to load an OS onto it? I purachsed this from ebay as a test box and dont know how to get an image on it.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: