Hi cjoseph,
no, not jet, but i have the same problem with more AP. Some AP are active again (alone) after one hour, some AP after two, and some after four or more time. For all AP the "bootstrap threshold" is the same value "8".
Hier, the result from the command from the LMS primary (10.250.123.31) controller:
(wlanc-01) #show ap database status down
AP Database
-----------
Name Group AP Type IP Address Status Flags Switch IP Standby IP
---- ----- ------- ---------- ------ ----- --------- ----------
AP10-4 kvn_cap-hil 205 10.10.10.20 Down 2 10.250.123.31 0.0.0.0
AP10-5 kvn_cap-hil 205 10.10.10.11 Down 2 10.250.123.31 0.0.0.0
AP10-6 kvn_cap-hil 205 10.10.10.26 Down 2 10.250.123.31 0.0.0.0
and hier, the same command from the LMS Backup (10.250.123.32) controller:
(wlanc-02) #show ap database status down
AP Database
-----------
Name Group AP Type IP Address Status Flags Switch IP Standby IP
---- ----- ------- ---------- ------ ----- --------- ----------
AP10-4 kvn_cap-hil 205 10.10.10.20 Down 2 10.250.123.32 0.0.0.0
AP10-5 kvn_cap-hil 205 10.10.10.11 Down 2 10.250.123.32 0.0.0.0
AP10-6 kvn_cap-hil 205 10.10.10.26 Down 2 10.250.123.32 0.0.0.0
It's OK, when the "switch IP" for a AP ist nicht the same at both controller?
Thanks,