So hopefully this makes sense how I'm going to describe this issue.
We have 2 access points that work fine unless as PoE Switch or the Aruba Controller is restarted. Once that happens, the access point will not reconnect, no matter what we do. I've checked patch cords, cable runs, switch configs, etc. I've swapped the non working APs to known working ones. They still don't come on, but the one I swapped it works in the other location.
The ONLY solution I've found is factory reset the access point (run the purge and clear os commands). Then the next time it boots it works. I can then reset the IP address and rename it, click Provision and it works until next time.
Is there anything else I can try?