Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Adding a Guest User with Limited bandwidth access

This thread has been viewed 3 times

  • 1.  Adding a Guest User with Limited bandwidth access

    Posted Aug 30, 2013 08:55 AM

    Hello,

     

    I would like to add a new guest user and be able to limit his speed. Is that possible? How can that be achieved on the Mobility controller?

     

    Regards,

    fmo



  • 2.  RE: Adding a Guest User with Limited bandwidth access
    Best Answer

    EMPLOYEE
    Posted Aug 30, 2013 09:01 AM

    Absolutely!  In the guest role you create, you can assign a bandwidth contract. 

     

    See below

     

    1. Configure the bandwidth contract in Configuration --> Advanced Services/Stateful Firewall --> BW Contracts (tab at top right)

     

    Screen Shot 2013-08-30 at 8.58.47 AM.png

     

    2. Add that bandwidth contract to the guest role.  I would make it per user and not per role.  Note...the shot below is from 6.3 but the workflow is similar.  The screen below will look different in older code.

     

    Screen Shot 2013-08-30 at 8.59.24 AM.png



  • 3.  RE: Adding a Guest User with Limited bandwidth access

    Posted Sep 04, 2013 02:18 AM

    If am using the default role, then all i have to do is edit the role *guest* right?



  • 4.  RE: Adding a Guest User with Limited bandwidth access

    Posted Apr 23, 2014 02:29 AM

    do we need pefng licenses for applying bandwidth contract?



  • 5.  RE: Adding a Guest User with Limited bandwidth access

    EMPLOYEE
    Posted Apr 23, 2014 05:48 AM

    Yes.