Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Adding another DHCP scope

This thread has been viewed 0 times

  • 1.  Adding another DHCP scope

    Posted Nov 21, 2014 01:29 PM

    We have to add another DHCP scope because we are running out of IP's. I cannot just change the sbunet mask on the existing one because some of the devices had to be statically assigned.  I added the VLAN to the VAP so both the old and new VLANs are listed. To make matters a little more difficult we use DHCP Reservations to assign the other devices. I tested it by reserving an IP in the new VLAN, but it gets one from the old one. Any ideas?



  • 2.  RE: Adding another DHCP scope

    EMPLOYEE
    Posted Nov 21, 2014 01:32 PM
    Wireless + DHCP reservations + multiple subnets doesn't mix well.

    You should try creating user derived rules for those Mac addresses to assign the appropriate VLAN.