04-06-2016 05:15 AM
We are seeing a number of APs reported as 'mismatched' on Airwave. The APs are reporting as
'device antenna selection external'
The 'desired config' is 'Internal'
The APs I'm looking at are 204's.
I don't know which group I can find the 'antenna selection' setting to change it. Can anyone help? It doesn't appear to be the 'Installation' (Indoor/Outdoor/Default) setting.
Solved! Go to Solution.
04-06-2016 05:51 AM - edited 04-06-2016 05:52 AM
I had a bunch of APs in this state as well, I had to manually update the config using Configuration/AP Installation (on controller, our AW is read only). You update them one at a time or in batches if you can't reboot them all at once.
As a last resort you can exclude that error in AW.
04-06-2016 06:10 AM
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
04-06-2016 06:42 AM
Are you using Airwave to Manage the configuration of your devices? If not, that can be ignored, because every time you make configuration changes on your device, it will show up as mismatched. The alternative is to turn off auditing.
Thanks - that explains it, we configure devices via the controllers, we mostly use Airwave for troubleshooting (at the moment).
04-08-2016 11:17 AM
Just following up on this - although we are happy that we can ignore the mismatches there is still some concern that these settings appear to differ, and we're not actually sure what the 'device antenna selection external' setting actually refers to. Can you help with that?