Hi all,
I am a bit confused with alias definition.
If i have a firewall policy: any any svc-icmp permit
Who is the alias?- network source- network destination- network service
An alias typically refers to a variable that represents an ip address or network:
http://www.arubanetworks.com/techdocs/ArubaOS_65x_WebHelp/Web_Help_Index.htm#ArubaFrameStyles/Firewall_Roles/Policies.htm
In your example, the alias would be "any" because it would represent any network traffic.
Hi, there is a couple of Aliases. A network service alias :
A network service alias defines a TCP, UDP or IP protocol and a list or range of ports supported by that service. When you create a network service alias, you can use that alias when specifying the network service for multiple session ACLs.
(host)(config) #netservice <name> <protocol>|tcp|udp {list <port>,<port>}|{<port> [<port>]} [ALG <service>
Or a Network Alias which can be either your source or destination subnet. So this is a network IP or IP ranges.
(host)(config) #netdestination “Internal Network”network 10.0.0.0 255.0.0.0 network 172.16.0.0 255.255.0.0
Thank you guys. This question was in an exam and it was with alternatives.
Only one answer should be chosen,..so Im confused:
A. Net service
B. Net source
C. Net destination
07-03-2017 03:34 AM
The Answer is A. Should I say A is the more complete answer.
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.